Increasing number and complexity of dry etch processing steps has led to a boom for cooling systems.
In what has been an incredible ride over the past five years for everyone in the semiconductor supply chain, suppliers of chillers have shined as standout performers. These cooling systems that are stuck in the sub-fab space under the clean rooms get little attention, yet revenues have more than doubled in the past five years, clocking a compound annual growth rate of 22% to reach $635 million in 2021, way above industry average growth of 13.3%.
The rise in the number and complexity of dry etch processing steps in the manufacture of memory and logic devices has been key to this impressive growth. Chillers and heat exchangers have done particularly well in addressing the challenge of keeping wafers within a narrower temperature range during processing. While this factor alone reflects an incremental improvement in chiller technology, it doesn’t explain why the segment has performed so well.
The main catalyst for the exceptional growth has been the increase in radio frequency (RF) power delivered into the etch process chamber. This additional power generates more heat, which needs to be dissipated and controlled, and this is where chillers have really come into their own. The solution requires more chillers, and more chillers with higher specifications – a combination has driven the spectacular growth.
The top chiller supplier by revenue, U.S.-based Advanced Thermal Sciences (ATS), has benefited from the dominance of U.S. OEMs in the dry etch market. Shinwa Controls in Japan is in second place and Korea-based Unisem and GST are in the third and fourth spots, respectively.
One of the biggest challenges for all chilling equipment suppliers – apart from meeting demand – is reducing the huge amounts of energy these chillers consume. The development of more compact and efficient chillers will be a key differentiator in the future.
Chillers and heat exchangers for dry etch applications account for 61% of total revenues. However, they can be found in other processes too. For example, 19% are used for deposition and 20% for processes such as ion implant, CMP and wet processing.
Despite the staggering growth performance of the chillers and heat exchangers segment over the last five years, we expect the growth rate to moderate significantly by 2026 as the rate of increase in vacuum processing steps returns to normal levels. This will happen because:
Future growth trend for chillers and heat exchangers is forecast to be in line with the critical subsystems industry average at approximately 3% CAGR up to 2026.
Name* (Note: This name will be displayed publicly)
Email* (This will not be displayed publicly)
Suppliers are investing new 300mm capacity, but it’s probably not enough. And despite burgeoning 200mm demand, only Okmetic and new players in China are adding capacity.
Why UCIe is so important for heterogeneous integration.
Funding rolls in for photonics and batteries; 88 startups raise $1.3B.
Experts at the Table: Designing for context, and geopolitical impacts on a global supply chain.
Memory footprint, speed and density scaling are compounded by low-power constraints.
Interest in this particular ISA is expanding, but the growth of other open-source hardware is less certain.
Nanosheets are likeliest option throughout this decade, with CFETs and other exotic structures possible after that.
Hybrid bonding opens up whole new level of performance in packaging, but it’s not the only improvement.
Suppliers are investing new 300mm capacity, but it’s probably not enough. And despite burgeoning 200mm demand, only Okmetic and new players in China are adding capacity.
Why this is becoming a bigger issue, and what can be done to mitigate the effects.
From low resistance vias to buried power rails, it takes multiple strategies to usher in 2nm chips.
Manufacturing 3D structures will require atomic-level control of what’s removed and what stays on a wafer.
Disaggregation and the wind-down of Moore’s Law have changed everything.